Products
FEATURES & BENEFITS
- Affordable real-time total suspended solids (TSS) monitoring
- Operator friendly, low maintenance LED design
- Bypass style sensor with multiple flow cell selections to meet application demands
- Quick and simple optical measurements
- Long-life LED light source
- Reagent free operation
1. REAL TSS SENSOR
CHARACTERISTIC | TECHNICAL DATA |
Path Lengths | 0.5, 1, 2, 4, 10 mm (1000 series) |
Parameters | Total Suspended Solids (TSS) |
Range | Depends on model selected. Refer to range chart. |
Units | mg/L, ppm |
Sampling Time | 30 seconds |
Calibration | Factory parameter calibration allows field adjustment as required. |
Cleaning | In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional. |
Self-Diagnostic | Detection and diagnosis of internal system fault |
Alarms | Dry contact terminals allow operator configurable alarms for: |
Humidity Control | Humidity sensor with large regeneratable desiccant system |
Wavelengths | Near infrared (NIR) |
Light Source | LED |
Flow Rate | 500 - 1000 mL/min (1000 series) |
Pressure Rating | 85 PSI maximum (1000 series) |
Fluid Connections | 3/8" OD tube push-in fittings (1000 series) |
Wetted Materials | Kynar, FEP, Quartz, SS316L, Viton (1000 series) |
Electrical/Comm. | From controller |
Ambient Temp. | 0 to 45°C (32 to 113°F) |
Water Temp. | 0 to 90°C (32 to 194°F) at 21°C (69.8°F) Ambient temperature |
Enclosure | NEMA 4X, wall mountable |
Weight | 22 lb (1000 and 2000 series) |
Dimensions | 17"H x 14.25"W x 7.5"D (1000 and 2000 series) |
Warranty | 2-year limited warranty (Extended care packages available) |
* Technical Specifications are subject to change without notice.
* Water temperature range based on material compatibility only. Contact Real Tech to verify application.
2. REAL TSS PROBE
CHARACTERISTIC | TECHNICAL DATA |
Path Length Options | 1, 2, 4, 10 mm |
Parameters | Total Suspended Solids (TSS) |
Range | Depends on model selected. Refer to range chart |
Units | mg/L |
Sampling Time | 10 seconds |
Calibration | Factory parameter calibration allows field adjustment as required. |
Cleaning | Automatic compressed air or pressurized water cleaning with optional Probe Clean System |
Self-Diagnostic | Detection and diagnosis of internal system fault |
Alarms | Continuous detection of leaks, lamp output, humidity, temperature and electrical fault |
Humidity Control | Humidity sensor with desiccant pack |
Wavelength | Near infrared (NIR) |
Light Source | LED |
Electrical/Comm. | From controller |
Operating Temp. | 0 to 45°C (32 to 113°F) |
Housing Material | HDPE |
Wetted Materials | HDPE, Sapphire, Epoxy, Titanium, SS 316L, Viton |
Weight | 5 lb |
Dimensions | 13.7" H x 2.9" Diameter |
Warranty | 2-year limited warranty (Extended care packages available) |
* Technical Specifications are subject to change without notice.
* Operating (water) temperature absolute maximum 55°C (131°F). Instrument performance reduced when operating outside recommended operating range. Contact Real Tech to verify application.



