REAL-TIME BOD/COD MONITORING

Detect events rapidly to improve process control and ensure effluent goals are obtained. Real Tech's real-time BOD/COD monitoring solutions can provide significant cost savings.

Product code: BL Series/ BA Series

Producer: Real Tech

Origin: Canada

Real Tech’s innovative BOD and COD sensors utilize patent-pending and proprietary technology for superior measurement performance across multiple wavelengths of light using UV LEDs.

Many compounds absorb light in the UV-VIS spectrum including organics. The sensors measures organics in a multi-dimensional way that results in improved correlations to water quality parameters such as BOD, COD and TOC.

Real Tech offers both a submersible BOD/COD probe (BA series) and bypass BOD/COD sensor (BL series) options to allow the right selection for our clients needs. Multiple path length options are also available to ensure our clients have the detection range that meets their wastewater monitoring demands.

Product detail

1. REAL BOD/COD SENSOR (BL SERIES)

Parameter(s): BOD, COD, TOC

CHARACTERISTIC	TECHNICAL DATA
Path Lengths	0.5, 1, 2, 4, 10 mm (1000 series) 1, 2, 4, 8 mm (2000 series)
Parameters	BOD, COD, TOC
Range	Depends on model selected. Refer to range chart.
Units	mg/L
Sampling Time	30 seconds
Calibration	Factory parameter calibration allows field adjustment as required.
Cleaning	In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional.
Self-Diagnostic	Detection and diagnosis of internal system fault
Alarms	Dry contact terminals allow operator configurable alarms for: high and low set points, low lamp output, leak detect, system fault, etc.
Humidity Control	Humidity sensor with large regeneratable desiccant system
Wavelengths	Multiple wavelengths
Light Source	UV LED
Flow Rate	500 - 1000 mL/min (1000 series) 300 - 1000 mL/min (2000 series)
Pressure Rating	85 PSI maximum (1000 series) 20 PSI maximum (2000 series)
Fluid Connections	3/8" OD tube push-in fittings (1000 series) 1/4" OD tube push-in fittings (2000 series)
Wetted Materials	Kynar, FEP, Quartz, SS316L, Viton (1000 series) Kynar, Polyethylene, Quartz, SS 316L, Viton (2000 series)
Ambient Temp.	0 to 45°C (32 to 113°F)
Water Temp.	0 to 90°C (32 to 194°F) at 21°C (69.8°F) Ambient temperature
Enclosure	NEMA 4X, wall mountable
Weight	22 lb
Dimensions	17"H x 14.25"W x 7.5"D
Warranty	2-year limited warranty (Extended care packages available)

* Technical Specifications are subject to change without notice.

* Water temperature range based on material compatibility only. Contact Real Tech to verify application.

2. REAL BOD/COD PROBE (BA SERIES)

Parameter(s): BOD, COD, TOC, TSS

CHARACTERISTIC	TECHNICAL DATA
Path Length Options	0.5, 1, 2, 4, 10 mm
Parameters	BOD, COD,TOC, TSS
Range	Depends on model selected. Refer to range chart
Units	mg/L
Sampling Time	10 seconds
Calibration	Factory calibrated. Field adjustment of calibration is possible.
Cleaning	Automatic compressed air or pressurized water cleaning with optional Probe Clean System
Self-Diagnostics	Detection and diagnosis of internal system fault
Alarms	Continuous detection of leaks, lamp output, humidity, temperature and electrical fault
Humidity Control	Humidity sensor with desiccant pack
Wavelengths	Multiple wavelengths
Light Source	UV LED
Electrical/Communication	From controller
Operating Temp.	0 to 45°C (32 to 113°F)
Housing Material	Titanium or Stainless Steel
Wetted Materials	Titanium, Epoxy, Sapphire, SS 316L, Viton
Weight	4.6 lb
Dimensions	15" H x 2.0" Diameter
Warranty	2-year limited warranty (Extended care packages available)

* Technical Specifications are subject to change without notice.

* Operating (water) temperature absolute maximum 55°C (131°F). Instrument performance reduced when operating outside recommended operating range. Contact Real Tech to verify application.

Products

1. REAL BOD/COD SENSOR (BL SERIES)

2. REAL BOD/COD PROBE (BA SERIES)