REAL FREE CHLORINE SENSOR

Real Tech’s Free Chlorine potentiostatic sensor technology is an amperometric measurement with constant potential, made through two metal electrodes and a reference electrode. The electrodes potential is electronically controlled in relation to the liquid, providing a steady and accurate relationship between cell current and concentration. As a result, calibration is required less frequently in comparison to traditional amperometric measurements and a very stable zero value is achieved in oxidative absence. A temperature sensor performs automatic compensation in the case of significant temperature fluctuations.

Product code: FC1000L

Producer: Real Tech

Origin: Canada

FREE CHLORINE SENSOR

Real Tech’s bypass style Free Chlorine sensor provides rapid real-time measurement of free chlorine, chlorine dioxide and/or dissolved ozone in water or wastewater. Ideal for pressurized applications, the monitoring solution has three measurement ranges.

LIQUID AI COMPATIBLE

Our Liquid Ai data services complement our real-time water quality monitoring systems. Our Remote Monitoring platform is a powerful data management and visualization tool that enables access to data anywhere, anytime.

FEATURES & BENEFITS

Affordable, real-time free chlorine, chlorine dioxide and/or dissolved ozone measurement
Potentiostatic sensor technology
Range for wastewater to high purity applications
Automatic temperature compensation
Low maintenance requirements
Simple to install and operate
No reagents required

CHARACTERISTIC	TECHNICAL DATA
SENSOR
Parameters	Free chlorine, chlorine dioxide, and/or dissolved ozone
Free Chlorine Range	Selection of three measuring ranges: 0-2 mg/L , 0-20 mg/L or 0-200 mg/L
Resolution	0.001, 0.01 or 0.1
Units	ppm / mg/L
Sampling Time	0.5 seconds
Measurement Principle	Potentiostatic measurement technology
Electrodes	2 platinum rings
Reference	Gel with annular junction
Sensor Lifetime	Approximately 12-18 months. Depends on site and application
Calibration	Manual correction on the selected scale and sensor’s current offset
Cleaning	Pressurized DI water only
Temperature Compensation	Automatic with RTD
Flow	Constant flow required. ~150-500 mL/min
Fluid Connections	Inlet: 1/4” fitting. Outlet: fitting for 10x14 mm tubing
Dimensions	5.90”H x 3.54”W x 1.57”D
TRANSMITTER
Interface	Four buttons to control set-up and configuration
Display	1 line x 8 character LCD
Output	Self-powered 4-20mA, RS485 serial to PC
Electrical	9-36 VDC
Operating Temp	0 to 50°C (32 to 122°F)
Storage Temp	-10°C to 60°C (14 to 140°F)
Weight	5 lb
Enclosure	IP40, wall mountable. IP65 / NEMA4 optional.
Dimensions	2.79”H x 3.74”W x 2.28”D (IP65/ NEMA 4 cabinet - 10.25”H x 10.25”W x 5.5”D)
Warranty	2-year limited warranty

Products