BETL PRESS NBD-E TYPE
Cost-effective solution for sludge treatment
CHI-SHUN Conveyor Slurry Press is made of special materials with the frame of the slurry press made from steel, so it can work in environments with high chemical and mechanical corrosion. CHI-SHUN conveyor sludge dewatering machine is equipped with a pre-press sludge condensing belt, a multi-stage pressing conveyor design to save installation space, and an automatic pneumatic conveyor belt alignment system.
Product code: NBD - E
Producer: CHI-SHUN
Origin: Taiwan
Double Belt Press Machine
- No Rotary Drum Thickening device
- Suitable used in high concentration (s.s)
sludge
- Brings out 5~8% solid contents with 1.5~3%
inlet s.s
- Broadly application in industrial sludge
Belt filter presses are used extensively at
the wastewater treatment plants due to its high productivity and reliability.
Whole frame and rollers made in stainless steel for anti-corrosion and extend
using life, even suit to variously industry type.
1. Material: stainless steel (SUS-304 /
SUS-316)
2. Surface treatment: Anti-rust painting,
Stainless steel passivation (According to customer needs)
3. Production can be modified according to
customer drawings
4. High quality, high efficiency, low energy
consumption, low maintenance cost
5. Origin: Taiwan
Product detail
Operation principle of CHI-SHUN conveyor sludge dewatering machine:
- The amount of dilute slurry after flocculation with cotton-forming polymer will be put on the conveyor belt for pressing. Here, the sludge is evenly distributed on the conveyor and the sludge will be preliminarily separated under the action of gravity, the concentration of solid sludge increases from 1 to 3%. The length of the auxiliary conveyor is from 1-2m depending on the design.
- Then, the sludge is clamped between two conveyors and compressed by a roller system that rotates around the shaft. The water will be gradually removed when the conveyor belt passes through the low pressure compression zone to the high pressure compression zone (Pressure pressure depends on the diameter and density and the layout of the rollers).
- The amount of water separated after percolating through the conveyor filter cloth will be recovered and returned to the wastewater tank to be treated again.
- The sludge after pressing is separated from the conveyor by a sludge scraper system designed at the end of the machine and washed by a high-pressure nozzle pipe system to continue the process of separation and filtration. Conveyor slurry press runs automatically and continuously with automatic pneumatic conveyor belt alignment system.
- The sludge after pressing has a cake shape and the sludge moisture reaches 60 - 85% (depending on the composition and nature of the input sludge).
Relate product
